This page can't be edited.

Red Pitaya - preliminary work

From $1

    Table of contents
    You are currently comparing two old versions - only when you are comparing against the latest version can you revert. Return to version archive.

    Combined revision comparison

    Comparing version 19:41, 3 Aug 2018 by Admin with version 19:43, 3 Aug 2018 by Admin.

    ...

    • use high-speed (125 MS/s) 14-bit ADC-A for video;
      set jumper for +/- 1 Volt input
      use resistor network for impedance matching
       
    • use high-speed 14-bit ADC-B for trigger
      set jumper for +/- 20 Volt input
       
    • use low-speed (100 kS/s) 12-bit ADC for ARP / heading (Analog input 0 = E2:pin 13);
      use resistor network to adjust range, limit current draw
       
    • use low speed 12-bit ADC for ACP / azimuth (Analog input 1 = E2:pin 14);
      use resistor network to adjust range, limit current draw.

    ...

    Version from 19:41, 3 Aug 2018

    This revision modified by Admin (Ban)

    ...

    Version as of 19:43, 3 Aug 2018

    This revision modified by Admin (Ban)

    ...

    • use high-speed (125 MS/s) 14-bit ADC-A for video;
      set jumper for +/- 1 Volt input
      use resistor network for impedance matching
       
    • use high-speed 14-bit ADC-B for trigger
      set jumper for +/- 20 Volt input
       
    • use low-speed (100 kS/s) 12-bit ADC for ARP / heading (Analog input 0 = E2:pin 13);
      use resistor network to adjust range, limit current draw
       
    • use low speed 12-bit ADC for ACP / azimuth (Analog input 1 = E2:pin 14);
      use resistor network to adjust range, limit current draw.

    ...


     
    Powered by MindTouch Core