This page can't be edited.

Red Pitaya - preliminary work

From $1

    Table of contents
    You are currently comparing two old versions - only when you are comparing against the latest version can you revert. Return to version archive.

    Combined revision comparison

    Comparing version 14:51, 28 Mar 2019 by Admin with version 16:40, 24 Apr 2019 by Admin.

    Update: 2019 April 24

    Please note that the connections for AZI and HDG were reversed in versions of this page
    before today.  AZI connects to pin 13, and HDG connects to pin 14.

    ...

    • use high-speed (125 MS/s) 14-bit ADC-A for video;
      set jumper for +/- 1 Volt input
      use resistor network for impedance matching
       
    • use high-speed 14-bit ADC-B for trigger
      set jumper for +/- 20 Volt input
       
    • use low-speed (100 kS/s) 12-bit ADC for ARP / heading (Analog input 10 = E2:pin 1413);
      use resistor network to adjust range, limit current draw
       
    • use low speed 12-bit ADC for ACP / azimuth (Analog input 01 = E2:pin 1314);
      use resistor network to adjust range, limit current draw.

    ...

    Version from 14:51, 28 Mar 2019

    This revision modified by Admin (Ban)

    ...

    • use high-speed (125 MS/s) 14-bit ADC-A for video;
      set jumper for +/- 1 Volt input
      use resistor network for impedance matching
       
    • use high-speed 14-bit ADC-B for trigger
      set jumper for +/- 20 Volt input
       
    • use low-speed (100 kS/s) 12-bit ADC for ARP / heading (Analog input 0 = E2:pin 13);
      use resistor network to adjust range, limit current draw
       
    • use low speed 12-bit ADC for ACP / azimuth (Analog input 1 = E2:pin 14);
      use resistor network to adjust range, limit current draw.

    ...

    Version as of 16:40, 24 Apr 2019

    This revision modified by Admin (Ban)

    Update: 2019 April 24

    Please note that the connections for AZI and HDG were reversed in versions of this page
    before today.  AZI connects to pin 13, and HDG connects to pin 14.

    ...

    • use high-speed (125 MS/s) 14-bit ADC-A for video;
      set jumper for +/- 1 Volt input
      use resistor network for impedance matching
       
    • use high-speed 14-bit ADC-B for trigger
      set jumper for +/- 20 Volt input
       
    • use low-speed (100 kS/s) 12-bit ADC for ARP / heading (Analog input 1 = E2:pin 14);
      use resistor network to adjust range, limit current draw
       
    • use low speed 12-bit ADC for ACP / azimuth (Analog input 0 = E2:pin 13);
      use resistor network to adjust range, limit current draw.

    ...


     
    Powered by MindTouch Core